Standard Colors for Your Underground Utilities

Underground utilities can easily be identified today. Before, it was difficult to do so and people were at risk if they try to make a dig without being able to identify all the lines underneath the land. Today, the risks have been lessened although not completely eliminated. In order to prevent harm, it is important to know or identify these utility lines if your need to dig the ground. Before digging through a certain piece of land, the OSHA requires that the underground utilities be located. Otherwise it can be something disastrous. Fatal injuries can happen if underground utility lines are struck. Services in the area where the lines are located can experience interruption. To prevent these types of incidents, it is important for property owners to call 811 so utility companies can identify their undergoing lines. Calling the 811 number will enable utility companies to come out and mark their respective utility lines.

But, despite the marks, there will sill be accidents. It is said that every 6 minutes, there is a utility line that is struck. When this happens, it affects traffic lights, wastewater pipes, telecommunication lines and more. These incidents affect public health and safety.

With the use of GPR or Ground Penetrating Radar, companies can locate utility lines. When locating utility lines underground, this machine makes it easy to do so. Companies can locate their utility lines if any property owner calls 811.

There are certain colors that mark different utility lines for easy identification. The colors below indicate the kind of utility uses it.

If you see white lines, then these are proposed excavation sites. It locates areas that will be excavated in the near future.

Temporary survey markings use pink lines. These are used by surveyors to mark off legal property boundaries.

Red lines are used to mark electric power lines, cable, conduit, and lighting cable. The color red is perfect for electric works because it is associated with fire and danger.

Lines for gas, oil, steam, petroleum, and gaseous materials use the color yellow. Bright yellow is an appropriate warning color since it is very disastrous to have a natural gas leak.

Orange lines are used for communication, alarm, signal lines, cable or conduit. Blue lines are used for potable water. Purple lines are used for reclaimed water, irrigation, and slurry lines. If you see the color green, then it indicates sewer and drain lines. A project can be derailed for a long time when these utility lines are hit.

Click here now if you want to learn more about the color coding of utility lines. You can view here for more.

Similar Posts